12
(18)
5 .3 . A BORDO DELLA PIATTAFORMA
5 .4 . VITE DI TRASMISSIONE - VERIFICHE PRELIMINARI E PERIODICHE .
IM.TEC.074.EN_rev.1.2
- February 2022
All rights reserved
EN
DomoFlex
- Screw-driven lifting platform
MAINTENANCE INSTRUCTIONS
INSIDE THE CAR
TRANSMISSION SCREW - PRELIMINARY AND PERIODIC CHECKS .
The lifting platform has been designed to ensure an easy access to the drive unit and platform shoes.
Follow the below instructions:
•
with the car stationary at one of the stops, open the Mains Supply Switch, press the STOP button in car and make sure that the
lift cannot be commanded from the control board;
•
remove the service panel unscrewing the safety screws;
•
put the service panel aside;
•
effect the necessary operations on the safety brakes;
•
re-position the service panel and fix it with the safety screws;
•
unblock the STOP button in the car, close the Mains Supply Switch and check the correct functioning of the lift.
WORKING ON THE BACK SIDE OF THE CONTROL BOARD
WARNING
ELECTRICITY HAZARD:
Make sure the wires are not pulled during the panel removal.
NOTICE
(fig.1)
(A)
(A)
(fig.2)
(fig.3)
In case of jointed screws
(fig.1)
,
the elastic joint pins
(A)
THEY MUST NEVER LEAVE THE
DIAMETER OF THE NUT OF THE
SCREW (fig.2-3).
NOTICE
CHECK THE CORRECT LUBRICATION OF THE SCREW
as indicated in § 5.5 point 8.
