background image

POWER LIFT

 

BASKETBALL SYSTEM

Icon Legend................................2
Notices....................................3
Pole Assembly.............................4
Pole to Base Assembly.................9
Backboard to Rim Assembly.......13
Backboard to Pole Assembly.......18
Parts Identifi er..........................i-iv
Handle Assembly.......................22
Final Assembly..........................27
Maintenance Instructions..........31
Warning Sticker........................33 
Registration........................34
Warranty................................35

(2)

(2)

(1)

(1)

(1)

(1)

(1)

(1)

(1)

(1)

3/8”, 1/2”,  9/16”, 3/4”

1/2”

3/16”

(2)

(375 lb)

TOOLS REQUIRED

TABLE OF CONTENTS

• Before you start, decide how you would like to fi ll

your base (sand is recommended, see page 29).

• Assembly should take 2 people about 2-3

hours to complete.

ASSEMBLY INSTRUCTIONS

MODEL #60091

MODEL 90682

Save this instruction in the event that the manufacturer has 
to be contacted for replacement parts.

BEFORE ASSEMBLY:

CONTACT LIFETIME CUSTOMER SERVICE:

Call: 

1-800-225-3865

7:00 am–5:00 pm (Monday–Friday) MST 
and 9:00 am–1:00 pm Saturday MST

QUESTIONS?

MODEL# AND PRODUCT ID

 

(you will need both when contacting us)

Model Number: 

90682

Product ID:

For Customer Service in Mainland 
Europe and the United Kingdom,
E-mail

:

 

[email protected]

Live Chat:  

www.lifetime.com  

(click on “Ask An Expert” tab) 

Video Instructions:

www.youtube.com/lifetimeproducts

1/4”

(1)

COPY

Содержание POWER LIFT 90682









































Отзывы: