Lifetime POWER LIFT 71281, Руководство пользователя с инструкциями по сборке

Страница: 8 / 28

8
For a nonpermanent installation of your basketball system, a Ground Sleeve
provides an alternative to cementing the pole into the ground. See Page 22 for
more information.
24”
18”
14.5”
BP
1A
%JHBSPVOEIPMFwEFFQBOEwJO
diameter. The edge of the hole should be
flush with the edge of the playing surface.
.BLFBNBSLw
up from the dimpled
end of the Bottom
Pole (BP) (do not
scratch the powder
coating).
2
.JYCBHTPGDPODSFUFGPMMPXJOHUIFEJSFDUJPOTPOUIFDPODSFUF
CBHT,FFQJONJOEUIBUBUIJDLFSNJYPGDPODSFUFXJMMESZTUSPOHFS
Fill the hole to the top with concrete.
Insert the dimpled end of the Bottom Pole
JOUPUIFDFNFOUVQUPUIFwNBSLBOE
wBXBZGSPNUIFQMBZJOHTVSGBDF
If the pole is buried too deep or too shallow,
the Rim will not be at the correct height.
3
Form the cement into a downward slope away
from the pole to allow water runoff.
Failure to
do so may result in premature rusting of the pole.
1B
Save a 1/2 bag of concrete mix to use later in the assembly.
The slots in the Bottom Pole must
be parallel to the playing surface. If
necessary, insert a straight object (a ruler, wire,
etc.) through the slots in the Bottom Pole. Rotate
the pole until the straight object is parallel to the
playing surface.
Playing Surface