Lifetime POWER LIFT 71281, Руководство пользователя с инструкциями по сборке

Страница: 11 / 28

11
MP
TP
AJ
9A
This step cannot be reversed.
WARNING
The poles must be seated together!! Even if the poles cover the
slots before seating, you must strike them hard on the wood
mWFUPTJYUJNFT'BJMVSFUPTFBUUIFQPMFTDPSSFDUMZDPVMEBMMPX
the poles to separate during use, which could lead to serious
personal injuries or property damage as listed on Page Two.
In order to seat the poles, strike each end of the pole very
IBSEUPUJNFTPOBQJFDFPGTDSBQXPPEPSDBSECPBSE
This must be done even if the poles cover the slots before
seating.
If the Top Pole does not completely cover the slot on the Middle
Pole after seating, DO NOT COMPLETE ASSEMBLY. Call our Customer
Service Department.
Do not hit your feet with the pole sections, as serious injury could
occur.
AM
AQ
10
Zip Tie (AK)
Larger End
Use pliers to tighten the Zip
Ties (AK) securely. Cut off the
ends of the Zip Ties.
Zip Tie (AK)
The bottom of the Bellows (AQ)
overlaps the Gas Spring (AM) by
w5IFUPQJTwGSPNUIFUPQPGUIF
Spring.
9B
Required For This Page:
(1)
1005748
Screwdriver
PB
PB
PB
Insert the Self-tapping
Screw (PB) directly into
the chuck of the Electric Drill
and screw it into the Poles at
the location shown.
TP
MP