19
Step 3: Support Post Assembly
A. Remove the three bolts (15) and
washers (16) from the bottom of the
left upright (4).
B. Place the U shaped bracket on the
bottom of the support post onto the
main frame of the unit. Align the
three holes in the bracket with the
holes in the frame. Install the three
bolts (15) and washers (16) removed
in step 3-A. Do not tighten at this
time.
C. Remove the three bolts (15) and
washers (16) from the bottom of
the right upright (5). Make sure the
cable (17) is not in the U-shaped
bracket.
D. Place the U-shaped bracket on the
bottom of the right support post
(5) onto the main frame. Align the
three holes in the bracket with the
holes in the frame. Install the three
bolts (15) and washers (16) removed
in step 3-C. Do not tighten at this
time.
E. Connect cable (17) coming from the
bottom of the right support post to
cable (18) coming from the motor
control board.
Assembling Your Treadmill
Note:
Move cables 17 and 18 so
they do not get pinched
or damaged when
installing upright.
5
17
18
4
15 16
