21
be adjusted. Pressing “+” or “-” to adjust value. Keep pressing on “+” or “-” button, the value will
continue to increase/decrease. When holding the pulse handlebars with both hands, PULSE LED will light up
and display pulse
value; if there is no pulse signal, PULSE window will display “P”.
Press START/STOP button to start training.
During training, user can adjust resistance level by pressing “+” or “-” button. When adjusting
resistance level, RESISTANCE window will show LEVEL value for 2s then display PULSE value.
The blue column will start blinking one by one and switch to the next one per preset time divided into
16.
Once the preset target data counting down to 0, the monitor will stop automatically.
User may also press START/STOP button to stop training. Press RESET reverse to main menu.
Drawing 14
Drawing 15
Drawing 16
Drawing 17
4.2 Program mode
Press RESET key to go to main menu. Press “+” or “-” key and press MODE to enter PROGRAM
mode. Entering Program mode, there are total 12 program profiles (P1~P12) (
Drawing 18~29
)
for selection. Press “+” or “-” key button to select one profile you prefer and press MODE to
confirm.
Before exercising, user need to adjust following value:
TIME:
is blinking (
Drawing 30
). User may press “+” or “-” key to set up target training time
from 00:00 to 99:00 (
Drawing 31
).
DISTANCE:
is blinking. User may press “+” or “-” button to set up target distance from 0.0~99.0.
Press MODE to confirm setting.
CALORIES:
is blinking. User may press “+” or “-” button to set up target calories from 0~990,
the increment/decrement is 10. Press MODE to confirm setting.
PULSE:
is blinking. User may press “+” or “-” button to set up target pulse from 0-30~230.
Press MODE to confirm setting.
Press START/STOP button to start training.
Содержание ST-13
Страница 5: ...5 3 EXPLODED DIAGRAM...
Страница 6: ...6...
