LifeSize Gateway-PRI, Руководство пользователя

Страница: 117 / 196

Configuring the LifeSize Gateway 109
Configuring Port Settings
8
In the Network access field, choose the LifeSize Gateway
national access type: TE (Terminal Equipment) or NT
(Network Terminator) device.
9 In the Clock source field, choose the LifeSize Gateway clock
source:
Master (the LifeSize Gateway provides the clock
signal)
Slave (the LifeSize Gateway receives the clock signal)
10
In the Line Build Out field, choose Long Haul or Short
Haul .
Note
You can configure this setting only if you select Japan in the Country
field. Skip to step 4 otherwise.
.
Related Topics
Configuring Fractional Channels
Configuring Line Coding, Framing and Signaling Type
C
ONFIGURING
F
RACTIONAL
C
HANNELS
In the Physical Interface section of the PRI Port tabs, you can configure
fractional channels as part of the physical line properties of the specified PRI
port.
Procedure
1
In the LifeSize Gateway interface, on the sidebar, click
Gateway (if not already selected).
2 Click the applicable PRI Port tab.
3
Click the Physical Interface button.
4 Click Fractional to select fractional channels.
The Fractional dialog box appears.
5 Select the Fractional line check box to enable the fractional
selection of channels.
6
In the Select the channels field, select the check boxes for the
individual channels you want to use for fractional E1 or T1