Endurance Training Collection
15
14
VeloCycle User Manual Lifepro
Endurance Training Collection
15
SECURE THE ASSEMBLED SEAT FRAME
TO THE SEAT POST
1. Remove the two square-neck bolts
(21)
, two flat washers
(22)
, and two
lock nuts
(23)
from the seat and backrest frame
(17)
.
2. Align the two bolt holes at the top of the seat post
(13)
with the
square bolt holes in the slot at the end of the seat frame.
3. Insert the two square-neck bolts
(21)
through the seat frame and the
seat post. Ensure the square neck of each bolt fits properly into the
square bolt hole in the seat frame.
4. Place a flat washer
(22)
onto each bolt.
5. Screw a lock nut
(23)
onto each bolt.
6. Use the multi-tool
(40)
to tighten both lock nuts. Hold each bolt head
in place with one hand as you tighten the lock nut to ensure the square
neck of the bolt stays in place.
6
13
21
23
22
17
(23)
(22)
(21)
x2
x2
x2
TOOLS & HARDWARE
(40)
ATTACH THE REAR HANDLEBARS
TO THE SEAT FRAME
1. Remove the two rear handlebar bolts
(20)
and curved washers
(8)
from
the curved flange of the seat and backrest frame
(17)
.
2. Align the bolt holes in the rear handlebars
(24)
with the bolt holes in
the curved flange on the seat and backrest frame
(17)
. The ends of the
handles will curve down and toward the top of the backrest when the
handlebars are positioned correctly. See figure below.
3. Place a curved washer onto each bolt.
4. Insert the bolts through the
BACK
of the handlebars and into the seat
frame.
5. Use the 6mm hex key
(42)
to tighten both bolts.
5
17
24
20
(20)
(9)
x2
x2
TOOLS & HARDWARE
(42)
(6mm)
8
