Endurance Training Collection
19
18
VeloCycle User Manual Lifepro
Endurance Training Collection
19
ATTACH THE CONSOLE/HANDLEBAR FRAME
TO THE BIKE FRAME
1. Plug the male cable
(34)
exiting the top of the console post into the
female cable
(33)
exiting the base of the console/handlebar frame.
Tuck the cables into the open cavity in the console post.
2. Insert the base of the console/handlebar frame
(29/30)
into the
console post
(28)
.
3. Place a flat washer
(27)
onto each of the four remaining bolts
(26)
.
4. Insert each bolt/washer combination through the four bolt holes: one
on either side of the post and the two on the front side.
NOTE:
You may need to wiggle the console/handlebar frame slightly to get
the bolt holes to line up for each bolt.
5. Use the 6mm hex key
(42)
to tighten the bolts.
10
29
30
33
33
34
34
28
33
34
33
34
(26)
x4
(27)
x4
TOOLS & HARDWARE
(42)
(26)
x4
(27)
x4
TOOLS & HARDWARE
(42)
ATTACH THE CONSOLE POST
TO THE BIKE FRAME
1. Remove the eight bolts
(26)
and eight flat washers
(27)
from the
console post insert
(28)
. Set aside four of each for step 10.
2. Plug the male cable
(34)
exiting the top of the console post insert into
the female cable
(33)
coming out of the bottom of the console post.
Tuck the connected wires inside the console post insert.
3. Slide the console post
(25)
onto the console post insert
(28)
.
4. Place a flat washer
(27)
onto four bolts
(26)
.
5. Insert each bolt/washer combination through the four bolt holes: one
on either side of the console post and the two on the front side.
NOTE:
You may need to wiggle the console post slightly to get the bolt
holes to line up for each bolt.
6. Use the 6mm hex key
(42)
to tighten the bolts.
9
25
26
26
27
27
28
(6mm)
(6mm)
