background image

 

12

Button Functions: 

START:

 To start training. 

STOP:

 To stop training. 

Mode:

 To select each mode (time, distance, calories, or pulse) for target 

presetting.    Press the MODE button for 3 second will reset the values 

of time, distance, or calories to zero.     

SET: 

To set each mode (time, distance, calories, or pulse) for target presetting. 

SPEED +: 

Speed up adjustment during exercise.     

SPEED -: 

Speed down adjustment during exercise. 

 
Computer Functions: 

TIME:

 Displays your elapsed workout time in minutes and seconds.  Press 

the START button and then press the SPEED + button, the running belt 

starts moving with the speed at 0.8km/h.    You may press the SPEED + 

or SPEED - button to increase or decrease the running speed during 

exercise.  Time starts counting up from 0:00 to 99:59 per 1 second 

increment.  You may also preset target time before training.  Press 

the MODE button to select TIME mode when it is flash and then press 

the SET button to preset target time.  Each increment is 1 minute.  

Press the MODE button for 3 seconds will reset the target values of time 

to zero.    The preset target time range is from 0:00 to 99:00 minutes.   

Once you preset target time, press the START button and then press 

the SPEED + button, the running belt starts moving with the speed at 

0.8km/h.    You may press the SPEED + or SPEED - button to increase 

or decrease the running speed during exercise.  Time starts counting 

down from preset target time to 0:00 per 1 second backward.    When 

the preset target time counts down to 0:00, the computer will begin 

beeping to remind you and the running belt will stop automatically. 

 

SPEED:

 Display the current running speed from the minimum 0.8km/h to the 

maximum 10km/h.    You may also press the SPEED + or SPEED - 

button to speed up or down your running speed during exercise. 

 

DISTANCE:

 Displays the accumulative distance traveled during workout.  

Press the START button and then press the SPEED + button, the 

running belt starts moving with the speed at 0.8km/h.    You may 

press the SPEED + or SPEED - button to increase or decrease 

the running speed during exercise.    Distance starts counting up 

Содержание 97288HP






















Отзывы: