LifeGear 97288HP, Руководство пользователя

Страница: 16 / 21

15
CARE, MAINTENANCE & TROUBLE SHOOTING GUIDE
WARNING: To prevent electrical shock, please turn off and unplugged the
treadmill before cleaning or routine maintenance.
CLEANING
The treadmill can be cleaned with a soft cloth and mild detergent. Do not use
abrasives or solvents. Be careful not get excessive moisture on the display
panel as this might cause an electrical hazard or electronics to fail.
Please keep the treadmill, specially, the console, out of direct sunlight to
prevent screen damage.
STORAGE
Store the treadmill in a clean and dry environment. Ensure the master power
switch is off and is at the off position and the power plug is un-plugged from the
electrical wall outlet.
TROUBLE SHOOTING GUIDE
1. Apply silicone lubricant.
2. Adjust running belt tension.
Adjust running belt tension.
1. Put the power plug into the
electrical wall outlet.
2. Install the safety tether key.
3. Reset or have an electrician
replace the breaker in home.
4. Wait five minutes and then
press the switch back in.
Center the running belt.
Problem
Treadmill will not start.
Running belt slips.
Running belt is off
centered.
Potential Cause
1. Not plugged in.
2. Safety tether key not installed.
3. House circuit breaker tripped.
4. Treadmill circuit breaker
tripped.
Running belt not tight enough.
1. Not enough lubrication applied
onto the running deck.
2. Running belt too tight.
Running belt tension not even
across the rear roller.
Corrections
Running belt hesitates
When stepped on.