After cleaning, dry it.
It is also necessary to continuously remove dust from the engine compartment and
adjacent parts (approximately every 2 months). Unscrew the plastic cover over the
engine and clean by vacuum cleaner (NOT to touch all electrical components), or if
you do not use the vacuum cleaner, use a soft brush and carefully clean everything
from dust. Then put the cover. DO NOT REMEMBER THAT THE TREADMILL HAVE TO
BE DISCONNECTED FROM THE SOURCE OF ELECTRIC POWER at cleaning.
Regularly check all bolts and nuts if are proper tightening.
11.
Storage
Store the belt in internal, dry and clean areas. Protect it from direct sunlight and high
temperatures. Do not put anything on the treadmill. Avoid the static electricity that
can interfere with the correct functioning of the meters or even damage it.
In winter store and use the treadmill in rooms with adequate humidity.
12.
Causes and resolution of potential failures
No.
Fault
Causes
Resolution
1
The treadmill can not be
started
The main switch is off (in
position "0")
Turn on the main switch to
position "1".
2
The control panel does
not display any
information.
The control panel and the
control unit are disconnected.
Remove the engine cover and
reconnect the panel with the unit.
3
The treadmill is sliping.
The seat belt is not tightened.
Tighten the running belt according
to Chapter 8.
4
The treadmill deflect to
the sides.
The treadmill is not adjusted.
Adjust the deviation of the
treadmill in accordance with
Chapter 8.
If you are unable to remedy the failure even with the above solutions, please contact
our specialist service as soon as possible.
13.
Error messages on the display
If there are any problems in running on the treadmill, the type of fault will appear on
the display. In the event that such a fault occurs, please contact our service center.
14.
Guarantee
The
product is protected by the warranty valid period in the country where the sale
was made. This warranty covers any manufacturing defects. It is not provided for
wear and tear due to normal use, defects and wear resulting from improper
handling, storage and use (example use for a purpose other than the product is) and
any product modifications. A stamped sales receipt is a warranty card.
Service Center: Rulyt s.r.o., Lounská 891, 438 01 Žatec, +420 412 150 172,
www.lifefit.pro
Importer and Distributor for the Czech Republic: Rulyt s.r.o., May 5, 435,
Dobroměřice 440 01, www.rulyt.eu