4. Service and Technical Data
Approved and Compatible Cleaners
Two preferred cleaners have been approved by reliability experts: PureGreen 24 and Gym Wipes. Both cleaners will
safely and effectively remove dirt, grime and sweat from equipment. PureGreen 24 and the Antibacterial Force formula
of Gym Wipes are both disinfectants that are effective against MRSA and H1N1.
PureGreen 24 is available in a spray which is convenient for gym staff to use. Apply the spray to a microfiber cloth and
wipe down the equipment. Use PureGreen 24 on the equipment for at least 2 minutes for general disinfection purposes
and at least 10 minutes for fungus and viral control.
Gym Wipes are large, durable pre-moistened wipes to use on the equipment before and after workouts. Use Gym Wipes
on the equipment for at least 2 minutes for general disinfection purposes.
Contact Customer Support Services to order these cleaners (1-800-351-3737 or email:
Mild soap and water or a mild non-abrasive household cleaner can also be used to clean the display and all exterior
surfaces. Use a soft microfiber cloth only. Apply the cleaner to the microfiber cloth before cleaning. DO NOT use ammonia
or acid based cleaners. DO NOT use abrasive cleaners. DO NOT use paper towels. DO NOT apply cleaners directly to
the equipment surfaces.
Preventive Maintenance Tips
Life Fitness products are backed by the engineering excellence and reliability of Life Fitness and are one of the most
rugged and trouble-free pieces of exercise equipment on the market today.
Note: Safety of the equipment can be maintained only if the equipment is examined regularly for damage or wear.
Keep the equipment out of use until defective parts are repaired or replaced.
Note: Pour assurer la sécurité du matériel, il convient de l'inspecter régulièrement afin de déceler tout signe
d'usure ou d'endommagement. N’utilisez pas l’appareil avant d’avoir réparé ou remplacé les pièces défectueuses.
Prêtez une attention particulière aux pièces sujettes à usure, tel que décrit ci-dessous.
The following preventive maintenance tips will keep the Life Fitness product operating at peak performance:
• Locate the product in a cool, dry place.
• Clean the display console and all exterior surfaces with an approved or compatible cleaner (see
) and a microfiber cloth.
• Long fingernails may damage or scratch the surface of the console; use the pad of the finger to press the selection
buttons on the console.
• Clean the housing and moving parts on a regular basis.
Troubleshooting
Check to see that the power cord is fully plugged into the
back of the product and into the wall socket.
No power.
You may be in Energy Saver Mode. Press the Energy Saver
button to see if the console turns on.
Verify that all customer assembly connections are working
properly. Unplug and re-plug each connection to verify.
Look to see if any cables were pinched during assembly.
Unplug or turn the unit Off to reset the console and then
turn On or plug the console back in. Repeat multiple times
if the console error message still appears. If the problem
persists, contact
.
Console display looks strange or has an error message
The unit will go into Energy Saver mode after five minutes
of inactivity.
Console turns off when not in use.
Page 27 of 32
Содержание Go Console
Страница 1: ...Track Connect Console Owner s Manual 1003858 0001 REV AB...
Страница 2: ......
