Life Fitness Hammer Strength MTAB, Руководство пользователя

Страница: 8 / 29

2. GENERAL SPECIFICATIONS
PERFORMANCE SPECIFICATIONS
1. Independent Movement Arms
•
Movement arms are independent of one another to insure proportional results.
•
Provides greater training variety such as training one arm at a time or alternating movements.
2. Dual Weight Stacks
•
Each movement arm is connected to its own weight stack in order to preserve the integrity of the
independent arm action.
3. Iso-Lateral Technology
•
Shall incorporate converging on pressing exercises and diverging movement on pulling exercises.
•
Replicates the body’s natural movements and minimizes joint stress.
MECHANICAL SPECIFICATIONS
1. Frame Construction
•
Frame shall be constructed of U.S. made mechanical quality steel purchased in mill run
quantities to assure the best consistency.
•
Primarily, 1 ½ “x 3” and 1 ½ “ x 2” rectangular tubing with 11 gauge thickness (.120 wall).
•
Frames to be bolted together for portability and space-efficient shipment.
•
Bolt plate flanges are 3/8” thick.
2. Frame Finish
•
Prior to applying finish, each part shall be sandblasted to prepare the surface for maximum
adhesion.
•
The frames are coated with an electrostatic epoxy powder coat finish applied in a powder form
and then baked at 400
°
F (204
°
C.)
•
To prevent frame and surface corrosion, wax equipment annually and keep away from salt,
chlorine and all other harmful chemicals.
3. Weight Selection
•
Weights are to be selected by using a 7/16” selector pin, which completely penetrates the weight
plate and is held in place with a magnet to eliminate any chance of disengaging during use.
•
The selector pin shall be connected to the top weight to eliminate loss or substitution of
substandard pins.
2-1