Life Fitness 4000, Руководство по обслуживанию

Страница: 39 / 47

20
Life Fitness Model 4000 Treadmill
How To ... REMOVE AND REPLACE THE TRAY
( Optional Heart Rate Kit )
Tools Required: Phillips screwdriver
Step 1
Turn the power OFF by unplugging the unit at
the electrical outlet.
Step 2
Remove the two SCREWS located on the
underside of the TRAY which are securing the
TRAY to the DISPLAY CONSOLE. Hold on to
the TRAY during this procedure to prevent the
TRAY from falling and possibly damaging the
WIRE HARNESS.
Step 3
Swing the TRAY slowly away from the back of
the DISPLAY CONSOLE while the extended
arms of the TRAY continue to rest on the
HANDLEBARS of the treadmill.
Step 4
Unplug the 3-PIN CONNECTOR of the Heart
Rate Monitor Receiver HARNESS (located
within the TRAY) from the matching 3-PIN
CONNECTOR on the back of the DISPLAY
CONSOLE.
Step 5
Swing the TRAY down while lifting the
extended arms of the TRAY from the HANDLEBARS and remove from the machine. Reverse Steps
1 through 4 to
replace the TRAY and restore all parts to their original positions.
NOTE: THE RED DOT ON THE HEART RATE MONITOR RECEIVER PLUGGED IN TO THE
RECEPTACLE INSIDE THE TRAY SHOULD ALWAYS FACE TOWARD THE USER.