LIBERTY AV SOLUTIONS DigitaLinx DL-HD2A-RX, Руководство пользователя

Страница: 9 / 20

DL-HD2A-RX Owners Manual
9
Connecting Control
RS232 Control Wiring
Connect the DL-HD2A-RX receivers RS232 port to a displays serial connection for serial control.
Apply Power
Plug the power supply into the power input port on the rear of DL-HD2A-RX receiver. The receiver will power the
transmitter via HDBaseT. Twist the locking ring clockwise to prevent accidental disconnection of power.
Note :
The DL-HD2A-RX RS232 port can be configured to send stored serial commands from the HDBaseT
transmitter so display ON/OFF button or can be used for display ON/OFF automation when a signal is
introduced to the wall plate transmitter when the wall plate is in an OFF state.
For directions on automation configuration see page 11, RS232 Port Configuration Software Usage
Connect the display devices RX RS232 signal to TX port of the DL-HD2A-RX receiver. Then connect the displays TX RS232
signal to the RX port on the DL-HD2A-RX receiver.
TX G RX
RX G TX
DL-HD2A-RX
RS232 PORT
DISPLAY
RS232
PINOUT
Connecting to
TV Display