LGMG SR0818D, Руководство по обслуживанию, Страница: 24 / 54

Maintenance Manual of Rough Terrain
Mobile Elevating Work Platform
18
into the ground.
△
!
Test run shall be carried out after
each operation. At the same time, pay
attention to the sealing and lubrication
oil pressure, and then check the
engine oil level.
It is available in the first 50 hours, and the
engine oil and filter shall be replaced every
400(V2403)/200
（
D1105
）
hours or half a
year/quarterly. (If the ambient temperature
continues to be below -10
℃
. (14
゜
F) or the
temperature of engine oil is below 60
℃
(84
゜
F),
or the sulphur content in the diesel fuel is 0.5 -
1%, the oil change period is reduced by a half; if
the engine oil does not reach the replacement
interval period within a year, the oil shall be
replaced at least once a year.)
△
!
Danger of burn, be careful of
high-temperature engine parts and oil,
contacting with high temperature
engine oil and/or engine parts will
cause severe burns.
△
! Perform the function after engine
warm up to normal operation
temperature.
Replacement of engine oil-Kubota
engine
1. Oil drain plug
1) Warm up and run the engine.
2) Place the engine horizontally.
3) Shut down the engine.
4) Place the container under the engine oil
drain plug.
5) Screw off the engine oil drain plug to drain
the old engine oil.
6) Install the new seal ring for the engine oil
drain plug and screw in and tighten it.
7) Add engine oil at the engine oil filler.
8) Warm up and run the engine.
9) Place the engine horizontally.
10) Wait for more than five minutes after filling
the oil. Check the engine oil level and fill it if
necessary.
Replacement of the Engine Oil Filter
Kubota-D1105
1. Oil filter
Kubota-V2403
1. Oil filter
The engine oil filter element must also be
replaced every time the engine oil is replaced.
△
!
Never fill the filter in advance.
There is risk of contamination.
1) If a torsion stopper is installed, remove the
clamping clamp (optional).
2) Release and unscrew the filter element with