LGMG SR0818D, Руководство по обслуживанию, Страница: 17 / 54

Maintenance Manual of Rough Terrain
Mobile Elevating Work Platform
11
oil pressure, and then check the
engine oil level.
It is available in the first 50 hours, and the
engine oil and filter shall be replaced every 500
hours or half a year. (If the ambient temperature
continues to be below -10
℃
. (14
゜
F) or the
temperature of engine oil is below 60
℃
(84
゜
F),
or the sulphur content in the diesel fuel is 0.5 -
1%, the oil change period is reduced by a half; if
the engine oil does not reach the replacement
interval period within a year, the oil shall be
replaced at least once a year.)
△
! Danger of burn, be careful of
high-temperature engine parts and oil,
contacting with high temperature
engine oil and/or engine parts will
cause severe burns.
△
! Perform the function after engine
warm up to normal operation
temperature.
Replacement of engine oil
1) Warm up and run the engine .
2) Place the engine horizontally.
3) Shut down the engine.
4) Place the container under the engine oil
drain plug.
5) Screw off the engine oil drain plug to drain
the old engine oil.
6) Install the new seal ring for the engine oil
drain plug and screw in and tighten it.
7) Add engine oil at the engine oil filler.
8) Warm up and run the engine.
9) Place the engine horizontally.
10) Check the engine oil level and fill it if
necessary.
Replacement of the engine oil filter
The engine oil filter element must also be
replaced every time the engine oil is replaced.
△
!
Never fill the filter in advance.
There is risk of contamination.
1) If a torsion stopper is installed, remove the
clamping clamp (optional).
2) Release and unscrew the filter element with
a wrench.
3) Contain the oil that was drained.
4) Clean the sealing surface of the filter holder
with a clean fiber-free wiper.
5) Apply a thin layer of engine oil to the seal
ring of the new filter.
6) Screw in a new filter manually until seal fit
and tighten it with 10-12 Nm.
Tighten the torque.
7) Fix the clamping clamp of a torsion stopper
(optional).
1.17.3 Check for fuel leakage
△
! The engine must be shut down!
No smoking and open fires!
Be careful when contacting high
temperature fuel!
Please observe the safety regulations
for fuel and relevant local regulations.
Dispose of spilled fuel and filter
elements in accordance with national
regulations. The fuel cannot seep into
the ground.
Visually check for fuel leakage every 8