LGB 25558, Руководство пользователя

Страница: 14 / 48

14
Register Assignment Range Default
1 Address 1 – 127 3
2 Minimum speed 0 – 255 25
3 Acceleration delay 0 – 255 5
4 Braking delay 0 – 255 5
5 Maximum speed 0 – 255 255
8 Reset 8 131
13 Function F1 – F8 with alternative track signal 0 – 255 32
14 Function FL, F9 – F15 with alternative track signal 0 – 255 1
17 Expanded address, higher value byte 192 – 231 192
18 Expanded address, lower value byte 0 – 255 128
19 Multiple unit operation address 0 – 255 0
21 Functions F1 – F8 with multiple unit operation 0 – 255 0
22 Function FL, F9 – F15 with multiple unit operation 0 – 255 0
29
Bit 0: Direction normal/inverted
Bit 1: Number of speed levels 14/28(128)
Bit 2: Analog operation off/on
Bit 5: short / long address active
0/1
0/2
0/4
0/32
6
50
Alternative Formats
Bit 1: Analog DC
Bit 3: mfx off/on
0/2
0/8
10
53 Motor control – control reference 0 – 255 255
54 Motor control – control parameter K 0 – 255 64
55 Motor control – control parameter I 0 – 255 64
56 Motor control – control influence 0 – 255 24
Register Assignment Range Default
60
Multi-station announcement
Bit 0 – 3: Number of stations
Bit 4: Last announcement changes the sequence
Bit 5: Locomotive direction changes the sequence
Bit 6: Start for the sequence
0 – 15
0/16
0/32
0/64
1
63 Total volume 0 – 255 255
64 Threshhold for squealing brakes 0 – 255 55
67 – 94 Speed table for speed levels 1 – 28 0 – 255
112 Mapping lights in the front, mode 0 – 16 1
113 Mapping lights in the front, dimmer 0 – 255 255
114 Mapping lights in the front, cycle 0 – 255 20
115 – 135 Mapping phys. outputs, lights in the rear, Aux 1 – 6,
compare 112 – 114
0 – 16
0 – 255
137 Factor for switching range 1 – 128 128
138 Volume for squealing brakes 0 – 255 255
139 Volume for Operating sounds 0 – 255 255
140 Volume for Long Horn 0 – 255 255
141 Volume for Short Horn 0 – 255 255
142 Volume for Bell 0 – 255 255
143 Volume for Sanding 0 – 255 255
146 Volume for Horn sequence 0 – 255 255
149 Volume for Cab radio 0 – 255 255
152 Volume for Compressor 255
176 Minimum speed in analog DC 0 – 255 5
177 Maximum speed in analog DC 0 – 255 240