9
Channel Map Learn Function
Using the FTG Configuration Application
Although it is not recommended, it may be necessary to perform a channel search on the TV/STB to determine
the channels available on the RF feed. Also, Aux input labeling may be changed. Refer to the Installation and
Setup Guide of the TV/STB for complete instructions. Even though it is recommended that this procedure be per-
formed prior to installing the FTG card, it is possible for it to be performed after FTG card installation, see
Installer Menu Access Is On
.
Learn a Channel Map
If it is necessary to transfer a TV/STB Channel Map to the PC, click the
‘Learn’
button. Logical Channel numbers
will automatically be assigned in ascending order, starting with 0 (zero), to the Physical Channels from the
TV/STB Channel Map. All the channels will have
‘Encrypted’
and
‘OSD’
Attributes set. During the transfer, the
FTG card’s channel map is also updated. If the FTG card and TV/STB were storing a FTG Channel Map from a pre-
vious
‘Write’
that map’s Logical Channels will be reassigned in ascending order starting with 0 (zero). This
Channel Map may be edited by opening the Editor, see
Channel Map Editor
.
Learn Function Caution
Learned Channel Map
(Logical Channels reassigned)
