13
Installer Menu Configuration Learn Function
Using the FTG Configuration Application
The Installer Menu Configuration utility
‘Learn’
function allows changes that are made to the TV/STB Installer
Menu by an IR remote to be transferred to the FTG card and the Installer Menu Configuration utility. Only certain
circumstances require this action. One would be, if it is necessary to reset Installer Menu settings to the Factory
Defaults using an IR remote. Refer to the Installation and Setup Guide of the TV/STB for complete instructions.
The aforementioned operation is made possible by the following actions:
A) While the FTG card is installed set
‘Installer Menu Access Is On’.
See
‘Installer Menu Access Is On’
.
Or
B) Remove FTG card, complete the procedure, and re-install FTG.
The Installer Menu settings must be transferred to FTG card before the changes will take affect. To do this, the
TV/STB Installer Menu items must be "learned" by the FTG card and the Installer Menu Configuration utility.
Learn an Installer Menu Configuration
If it is necessary to transfer a TV/STB Installer Menu to the FTG card and the Installer Menu Configuration utility,
click the
‘Learn’
button. The TV/STB Installer Menu data is stored in the FTG card and transferred to the
Installer Menu Configuration utility. The appropriate Installer Menu settings will now be available for editing
and/or saving to a configuration file. If addition changes are made, the Installer Menu Configuration must be
transferred back to the FTG card. See
Write an Installer Menu Configuration
.
Learn Function Caution
During the transfer, the FTG card’s channel map is also updated. If the FTG card and TV/STB were storing a FTG
Channel Map from a previous Channel Map
‘Write’
that map’s Logical Channels will be reassigned in ascending
order starting with 0 (zero). All the channels will have
‘Encrypted’
and
‘OSD’
Attributes set. This new Channel
Map may be transferred to the PC and edited. See the
Channel Map Write / Read Functions
and
Channel Map
Editor
.
Save an Installer Menu Configuration
To save an Installer Menu Configuration,
‘Exit’
the Installer Menu Configuration. On the main application window
click
‘File’
, then
‘Save’
. The Save As window will appear, the Installer Menu Configuration will be saved in a
configuration file (*.rml). Name the file and click the
‘Save’
button.
See also
Save Configuration File
