manualshive.com logo in svg

LG Zenith Free-To-Guest, Конфигурация

Поделиться
Скачать
LG Zenith Free-To-Guest Скачать руководство пользователя страница 20

20

Direct Access Tuning

Once the Channel Map has been stored, the channels
can be accessed using their Logical channel numbers.
This can be done by entering the channel number
followed by the “ENTER/OK”. If the channel number
is not followed by “ENTER/OK”, the channel will
change 2 seconds after the last digit was pressed. If
the number of digits entered is the same as the
number of digits of the highest Logical channel, the
channel change will initiate immediately. Channel
numbers may be preceded by zero(s) and will be
counted as a digit pressed.

Limited Menu

After the HCS1410 is installed, a limited menu is
available to the user. To prevent inadvertent changes
to Video and Audio Settings, access to these and
other menu items are disabled.

Firmware Version

The HCS1410 “Banner” will appear momentarily 
on the TV screen, the first time the system is 
turned on after AC power is applied, displaying 
the firmware version. 
The firmware version is also displayed anytime the
Update Button is pressed on the front of the card.
This “Banner” additionally shows the card serial
number and the number of mapped channels.

HCS1410 Installer Menu Defaults

The Installer Menu settings listed below are required
for proper FTG card operation and are  set by the FTG
card. Any changes made will be overwritten when the
FTG card is installed. Once the FTG card is installed,
the following Installer Menu item settings must not
be changed. 

HCS1410 LED Indicators

The LED, visible through the opening behind the
removal hook, will glow RED when it is first powered
up and will remain lit until the card has finished ini-
tializing.

• The LED will glow GREEN if there is activity

to/from the PC.

• The LED will glow RED if there is activity to/from

the TV/STB.

Item  Installer Menu Descriptions 

Preset

00 INSTALLER_SEQ 

00

29 OLD_OCV 

00

30 ACK_MASK 

00

31 POLL_RATE 

94

32 TIMING_PULSE 

207

47 AUX_STATUS 

01

53 DIS_CH_TIME 

01

69 EN_CH_T_COL 

01

70 FOR_CH_TIME 

02

71 BCK_CH_TIME 

02

82 CHKSUM_ERROR 

01

83 HANDSHK_TIME 

05

102 ATSC_BAND 

04

HCS1410 FTG Card Features

Содержание Zenith Free-To-Guest





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды