LG XPS 8500 Скачать руководство пользователя страница 97

Страница: 97 / 136

Processor Fan and Heat-Sink Assembly

Processor Fan and Heat-Sink

Assembly

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before You Begin" on
page 13. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.

WARNING:

The heat sink may be very hot during normal operation. Provide

sufficient time for the heat-sink to cool before you touch it.

Prerequisites

Remove the computer cover. See "Removing the Computer Cover" on

page 23.

Removing the Processor Fan and Heat-Sink

Assembly

WARNING:

Despite having a plastic shield, the processor fan and heat-sink

assembly may be very hot during normal operation. Ensure that it has had
sufficient time to cool before you touch it.

CAUTION:

To ensure maximum cooling for the processor, do not touch the heat

transfer areas on the processor fan and heat-sink assembly. The oils in your skin
can reduce the heat transfer capability of the thermal grease.

CAUTION:

The processor fan and heat-sink assembly is a single unit. Do not try to

remove the fan separately.

Disconnect the processor fan cable from the system board connector,

CPU_FAN. See "System-Board Components" on page 21.

Using a flat-blade screwdriver loosen the four captive screws that secure

the processor fan and heat-sink assembly to the system board.

book.book Page 97 Wednesday, October 10, 2012 10:32 PM

Содержание XPS 8500









































































































































Результаты поиска

Содержание XPS 8500

Отзывы:

LG XPS 8500, Руководство пользователя, Страница: 97 / 136

Результаты поиска

Содержание XPS 8500

Отзывы: