LG XPS 8500 Скачать руководство пользователя страница 125

Страница: 125 / 136

System Setup Utility

125

Boot Sequence

This feature allows you to change the boot sequence for devices.

Boot Options

•

Diskette Drive

—

The computer attempts to boot from the floppy disk

drive. If no operating system is on the drive, the computer generates an

error message.

•

Hard Drive

— The computer attempts to boot from the primary hard-

drive. If no operating system is on the drive, the computer generates an

error message.

Security

Supervisor Password

Displays the status of supervisor password

(Not Installed by default)

User Password

Displays the status of user password

(Not Installed by default)

Set Supervisor Password

Allows to set, change, or delete the

supervisor password

NOTE:

Deleting the supervisor password

will delete the user password. Hence, the

supervisor password must be set before

setting the user password.

HDD Protection

Enabled or Disabled (Disabled by

default)

Set User Password

Allows to set, change, or delete the user

password

Password Check

Setup or Always

Specifies when the user must enter

Supervisor Password; when entering

System Setup or Always (Setup by

default)

Exit

Exit options

Provides options to

Save Changes and

Reset, Discard Changes and Reset,

and

Load Defaults

book.book Page 125 Wednesday, October 10, 2012 10:32 PM

Содержание XPS 8500









































































































































Результаты поиска

Содержание XPS 8500

Отзывы:

LG XPS 8500, Руководство пользователя, Страница: 125 / 136

Результаты поиска

Содержание XPS 8500

Отзывы: