LG XPS 8500 Скачать руководство пользователя страница 126

Страница: 126 / 136

126

System Setup Utility

•

CD/DVD/CD-RW Drive

— The computer attempts to boot from the

optical drive. If no disc is in the drive, or if the disc is not bootable,

the computer generates an error message.

•

USB Storage Device

— Insert the memory device into a USB connector

and restart the computer. When

F12 Boot Options

appears in the

lower-right corner of the screen, press <F12>. The BIOS detects the

device and adds the USB flash option to the boot menu.

NOTE:

To boot to a USB device, the device must be bootable. To ensure that

your device is bootable, check the device documentation.

•

Network

— The computer attempts to boot from the network. If no

operating system is found on the network, the computer generates an error

message.

Changing Boot Sequence for the Current Boot

You can use this feature to change the current boot sequence, for example, to

boot from the optical drive to run Dell Diagnostics from the

Drivers and

Utilities

disc. The previous boot sequence is restored at the next boot.

If you are booting from a USB device, connect the USB device to a USB

connector.

Turn on (or restart) your computer.

When

F2 Setup, F12 Boot Options

appears in the lower-right

corner of the screen, press <F12>.

NOTE:

If you wait too long and the operating system logo appears, continue to

wait until you see the Microsoft Windows desktop. Then shut down your

computer and try again.

The

Boot Device Menu

appears, listing all available boot devices.

On the

Boot Device Menu

choose the device you want to boot from.

For example, if you are booting to a USB memory key, highlight

USB

Storage Device

and press <Enter>.

book.book Page 126 Wednesday, October 10, 2012 10:32 PM

Содержание XPS 8500









































































































































Результаты поиска

Содержание XPS 8500

Отзывы:

LG XPS 8500, Руководство пользователя, Страница: 126 / 136

Результаты поиска

Содержание XPS 8500

Отзывы: