LG VR7621SPG Скачать руководство пользователя страница 27

Страница: 27 / 56

SMART DIAGNOSIS

If a voice message is announced after Smart Diagnosis, refer to the following table to take proper actions.

Voice message

Measures (for reference)

Roboking smart diagnosis will be started. Please step away

and clear around 1 meter around the home station.

Clear any object within a 1

radius around Home

Station, and stay back until the diagnosis is complete.

Smart diagnosis can start when it is being charged. Please

dock Roboking to the home station to charge.

Move Robot cleaner to the Home Station to recharge it.

No defect found during diagnosis.
Diagnosis mode cannot be operated due to a low battery.

Please try again after the battery is charged.

Try the Smart Diagnosis again after recharging the

battery.

Please check if the dust bin is installed with the filter.

Open the Dust Bin Cover and examine the bin.

Charging cannot be done due to a problem in infrared

sensor.

Run Smart Diagnosis again and, if the same message is

announced, contact an LG Electronics service center.

Charging cannot be done due to a problem in ultrasonic

sensor.

Run Smart Diagnosis again and, if the same message is

announced, contact an LG Electronics service center.

Charging cannot be done due to a problem in the cliff

detection sensors on the bottom. Please clean the sensors.

Clean the three Cliff Sensors on the bottom at the front

of the unit.

Please wipe the lower camera sensor on the right bottom

of the Roboking.

Clean the lens of Camera Sensor on the bottom-right.

Please wipe the obstacle detecting sensor window on the

left and right side of the Roboking.

Clean the lens of the Obstacle Sensors on both the left

and right hand sides.

A problem has been found on the Gyro Sensor.

Run Smart Diagnosis again and, if the same message is

announced, contact an LG Electronics service center.

Please check for dirt on the left wheel.

Check for foreign materials on the left wheel.

Please check for dirt on the right wheel.

Check for foreign materials on the right wheel.

A problem has been found on the left wheel sensor.

Run Smart Diagnosis again and, if the same message is

announced, contact an LG Electronics service center.

A problem has been found on the right wheel sensor.

Run Smart Diagnosis again and, if the same message is

announced, contact an LG Electronics service center.

Please check the brushes for obstructions.

Check for any foreign material stuck in the Brush.

A problem has been found in the suction motor.

Run Smart Diagnosis again and, if the same message is

announced, contact an LG Electronics service center.

A problem has been found in the acceleration sensor.

Run Smart Diagnosis again and, if the same message is

announced, contact an LG Electronics service center.

In order to listen to the smart diagnosis result again, please

press the charging button. To stop, please press the stop

button.

If you need to repeat the diagnosis result, press the

'Home' button, or press ‘ ’ button to finish the

diagnosis.

Smart diagnosis mode will be turned off.

Please try smart diagnosis again after turning the main

power switch off and on from the back of Roboking. If

the problem continues, please contact LG Electronics

customer care.

Smart Diagnosis mode cannot be operated with mop plate

being attached. Please try again after removing it.

Run Smart Diagnosis again after removing the Mop

Plate.

Smart diagnosis has failed to operate. Please try it again

after turning off and on the main power switch on the back

of the Roboking.

Turn the main power switch OFF and then ON again

to resume the diagnosis. Do NOT touch the robot or

disturb its operation until the diagnosis is complete.

Содержание VR7621SPG

























































Результаты поиска

Содержание VR7621SPG

Отзывы:

Похожие инструкции для VR7621SPG

Бренды по названию

Популярные бренды

LG VR7621SPG, Руководство пользователя

Результаты поиска

Содержание VR7621SPG

Отзывы:

Похожие инструкции для VR7621SPG

Бренды по названию

Популярные бренды