LG VR7621SPG Скачать руководство пользователя страница 19

Страница: 19 / 56

HOW TO CHARGE THE BATTERY

The Robot Cleaner returns to the home station at the end of a

cleaning cycle or when its battery is running low.

※

If 10 minutes elapse without the Robot Cleaner moving or the

battery is too low, the power will be automatically turned OFF.

※

Do NOT turn OFF the Main Power Switch as the battery will not

be recharged. If the machine is returned manually with the Main

Power Switch OFF, it announces an error message, "Main power

switch on the back of the Roboking is turned off. Please turn the

switch on."

※

In the event that the unit returns to the Home Station due to a

low battery during the cleaning, cleaning will be started, after recharging, from the nearest place of

the area which has not been cleaned before.

※

If Robot Cleaner is unable to dock to the home station on its first attempt, it will try again until it

docks successfully.

※

When Robot Cleaner has completed all areas that it can clean, it will return to the home station even

when the battery level is not low.

Method 1. Attach the Robot Cleaner to the home

station by aligning to the front side of the

home station. A melody sound will be

generated along with an audio message

to start charging.

※

If a voice message, "Main power switch

on the back of the Roboking is turned

off. Please turn the switch on." is

announced repeatedly, then turn on

the Main Power Switch.

Method 2. When the 'HOME' button of the

remote control or the Robot Cleaner is

pressed, charging will be prompted by

automatically generating a searching

signal and returning the Robot Cleaner to

the home station.

Automatic charging

Manual charging

Take the following precautions when using the home station:
• If foreign material is caught on the charging terminal, charging may not be activated. Wipe

the terminal from time to time with a dry cloth after the power plug is disconnected.(p46)

• To prevent electric shock or damage to the home station, do not touch the charging

terminal with any metallic objects.

• To avoid fire or electric shock, never disassemble or modify the home station.

• Do not to place the Robot cleaner, the home station or power plug near a heating source.

Tip

You can manually charge the battery prior to using the Robot Cleaner for the first time or to charge

the battery during cleaning.

※

If the Robot Cleaner did not start cleaning from the home station or if the Robot Cleaner is

manually charged by pressing the Home button, it may take slightly longer to find the home station.

※

If the Robot Cleaner is within 10

of the front of the charging terminal while the power is turned

on from Standby, it will automatically be returned to the home station and charging will begin.

Содержание VR7621SPG

























































Результаты поиска

Содержание VR7621SPG

Отзывы:

Похожие инструкции для VR7621SPG

Бренды по названию

Популярные бренды

LG VR7621SPG, Руководство пользователя

Результаты поиска

Содержание VR7621SPG

Отзывы:

Похожие инструкции для VR7621SPG

Бренды по названию

Популярные бренды