manualshive.com logo in svg

LG TROMM F4999NTNH, Руководство пользователя, Страница: 57 / 64

Поделиться
Скачать
LG TROMM F4999NTNH Скачать руководство пользователя страница 57

Guide of accessories for Installation (sold separately)

LG provides various accessories for the installation for special conditions and environments.

You may purchase the accessories for installation required for your environment from the service centers.

※

  It is recommended to use genuine parts from LG for the installation accessories. 

 

(The use of non-genuine parts may reduce the product service life and cause other problems.)

Name

Shape

Kinds

Purpose and Usage

Height con-

trol plate

- For height 1 cm

- For height 5 cm

  

Use this plate to level a washer in installation when there is a gap between 

 

the surface and a leg of the washer.

  

Always use after assembling with a plastic plate and a rubber plate.

  

To make 2 to 4 cm height pile up 1 cm plates together.

Anti-slip mat

 

  

When installing on a slippery floor surface like tiles, it will be more stable if 

 

installed on an anti-slip mat to prevent a movement during operation.

Extension 

hose for wa-

ter supply

- 1 m for cold water 

- 1 m for hot water

- 2 m for cold water 

- 2 m for hot water

- 5 m for cold water 

- 5 m for hot water

  

Use this extension hose to extend the length of water supply hose.

 

Always use the water supply hose connector to connect two hoses.

Water  

Supply Hose 

Connector

  

Use the connector to extend the hose for the water supply.

Water  

supply hose 

set

  It is a set of water supply hose supplied with the washer.

 

(You may purchase a water supply hose set separately if lost during moving or for another reason.) 

  

Composition: 1 pc. of hose for cold water (1.25 m), 1 pc. of hose for hot water (1.25 m), 1 pc. of 

water supply hose connector

Plug screw 

type for the 

water supply 

hose

  

Use this plug if the end of tap is a screw or nipple type.

  

Screw the plug after unscrewing and removing the nipple attached 

 

on the tap.

  

Composition: 1pc. for cold water(blue), 1 pc. for hot water(orange)

Extension 

hose for 

draining

- 0.5m

- 1 m

- 1.6m

  

Use this to extend the length of drain hose.

  

It is supplied with the connector for the drain hose assembled.

Leg to control level

Water Supply Hose 

Connector

Plastic plate

Rubber plate

Nipple

Installation 

and Check

Содержание TROMM F4999NTNH

































































Отзывы:

Нет отзывов