manualshive.com logo in svg

LG TROMM F4999NTNH, Руководство пользователя, Страница: 53 / 64

Поделиться
Скачать
LG TROMM F4999NTNH Скачать руководство пользователя страница 53

How to connect the Water Supply Hose

Disassemble the Connector and Middle 

Connector from the Water Supply Hose.

  Disconnect the Connector from the Middle connector 

by turning to the left.

  

Disconnect the Middle connector from the water sup-

ply hose by pulling the hose while pressing the latch 

and latch plate.

  

If not disassembled, it may cause a water leak by 

weak tightening when connects.

Please note!

  When the water supply hose needs to be extended

 

  

You can purchase an extension water supply hose from an LG dealer or LG customer 

service center, and connect to the ‘Water Supply Hose Connector’ to extend the hose 

length.

 

 

  

If only one hose is used for the Hot or Cold water hose, the unused hose can be con-

nected to a ‘Water Supply Hose Connector’ to extend the length.

  If the water temperature is selected except cold water, both Hot and Cold 

water will be supplied. If only one has to be connected, make sure to 

connect to the Cold water tap.

Water Supply 

Hose Connector

Guide Plate

Big-Head Screw

Upper  

Connector

Middle 

 

Connector

Latch

Latch plate

Water Supply 

Hose

Installation 

and Check

Содержание TROMM F4999NTNH

































































Отзывы:

Нет отзывов