LG TROMM F4999NTNH Скачать руководство пользователя страница 11

Страница: 11 / 64

Label

for water

wash

Boiling wash, Machine wash (Hand washable) Any

detergent

40°C water, Machine wash Normal

(Hand washable)

Any detergent
30°C water, Machine wash Delicate

(Hand Washable Delicately)

Neutral detergent
30°C water, Hand Washable Delicately

(No Machine wash)

Neutral detergent

No water wash

Label for

Wring

Wring lightly by hand. Spin a short time.

No wringing.

General knowledge of laundry

How to sort clothes

Sort clothes after checking the care labels. (Specified by KS K-0021)

Label

for Dry

Cleaning

Dry Clean OK. Use a solvent of perchlorethylene or

petroleum.

Dry Clean OK. Use a solvent of petroleum only.

No Dry Clean.

Label for

Dry

Hanger Dry in Shade

Flat Dry

Label for

Iron

Iron at the temperature of 80~120°C.

Iron at the temperature of 140~160°C with cloth cover.

Iron at the temperature of 180~210°C with cloth cover.

Do not iron.

Adequate temperature for Iron



Select an adequate temperature for the garment.



The temperature for blended fabric is to be set for the lower heat

resistance fabric.



Heat resistant fabric such as cotton or hemp can be ironed on the outer side.

Woolen clothes need to be ironed on the outer side with cotton cloth cover.

Silk clothes need to be ironed on the inner side with a cotton cloth cover.

Fabric

Temp.(°C)

Hemp

180~200

Cotton

160~180

Woolen

140~160

Silk, Rayon

120~140

Fabric

Temp.(°C)

Polyester

100~120

Nylon

Acetate

70~100

Acryl

Others, Synthetic Fiber

120~150

Clothes not to be washed (It may result in shrinkage or deformation.)



Korean traditional dress or clothes including the fabric of Korean dress



Shoes, Electric blanket



Leather product, Tie, Suit, Coat, etc. which only need Dry Cleaning



Clothes with ornamentation



Artificially wrinkled dress



Clothes that can be shrunk by water or decolorized such as silk, woolen, rayon,
acetate, etc. or outer clothes with the lining or stiffener.



Other clothes that deform and decolorize even by soaking in water.

(Check the care label.)

Preparation

Содержание TROMM F4999NTNH

































































Результаты поиска

Содержание TROMM F4999NTNH

Отзывы:

LG TROMM F4999NTNH, Руководство пользователя, Страница: 11 / 64

Результаты поиска

Содержание TROMM F4999NTNH

Отзывы: