37
ENGLISH
Problem
Possible Cause
Solutions
Washer will not
operate
Control panel has powered
off due to inactivity.
•
This is normal. Press the POWER button to turn the
washer on.
Washer is unplugged.
•
Make sure cord is plugged securely into a working
outlet.
Water supply is turned off.
•
Turn both hot and cold faucets fully on.
Controls are not set
properly.
•
Make sure the cycle was set correctly, close the lid and
press the START/PAUSE button.
Lid or drawer is open
•
The washer will not operate if the lid is open. Close the
lid and drawer make sure that nothing is caught under
the lid preventing it from closing completely.
Circuit breaker/fuse is
tripped/ blown.
•
Check house circuit breakers/fuses. Replace fuses or
reset breaker. The washer should be on a dedicated
branch circuit. The washer will resume the cycle where
it stopped once power is restored.
Control needs to be reset.
•
Press the POWER button, then re-select the desired
cycle and press the START/PAUSE button.
START/PAUSE was not
pressed after a cycle was
set.
•
Press the POWER button then re-select the desired
cycle and press the START/PAUSE button. The washer
will shut off if the START/PAUSE button is not pressed
within 60 minutes.
Extremely low water
pressure.
•
Check another faucet in the house to make sure that
household water pressure is adequate.
Washer is too cold.
•
If the washer has been exposed to temperatures below
freezing for an extended period of time, allow it to warm
up before pressing the POWER button. Otherwise, the
display will not come on.
MFL69482502_EN.indd 37
16. 4. 5. 오전 9:16
Содержание T2735NTWV
Страница 10: ...09 ENGLISH serious injury SAVE THESE INSTRUCTIONS MFL69482502_EN indd 9 16 4 5 오전 9 16 ...
Страница 43: ...42 Memo MFL69482502_EN indd 42 16 4 5 오전 9 16 ...
Страница 52: ...09 ไทย การบาดเจ บร ายแรงได เก บรักษาค ำแนะน ำเหล านี MFL69482502_TH indd 9 16 4 5 오전 9 17 ...
Страница 85: ...MFL69482502_TH indd 42 16 4 5 오전 9 17 ...