LG T2735NTWV, Руководство пользователя

Страница: 36 / 85

35
ENGLISH
Problem Possible Cause Solutions
Water leaking Inlet hose connection is
loose at faucet, washer, or
Y-connector. • Check hoses and Y-connectors for leaks, cracks and
splits.
• Check and tighten hose connections.
House drain pipes are
clogged.
• The washer pumps out water very rapidly. Check for
water backing up out of the drain pipe during drain. If
water is seen coming out of the drain, check for proper
drain hose installation and check for restrictions in the
drain. Contact a plumber to repair drain pipe.
Drain hose has come out
of drain connector or is not
inserted far enough.
•
Tie drain hose to inlet hose or standpipe to prevent it
from coming out during drain. For smaller drain pipes,
insert the drain hose into the pipe as far as the drain
hose flange. For larger drain pipes, insert the drain hose
into the pipe 1-2 inches past the flange.
Load is too large for the
tub. • Reduce the load or use the full-size washing machine.
Use the Duvet cycle on the front-loading washer for
large or bulky items.
• Stop the washer and check the load. Make sure the load
fits loosely in the tub and the lid closes easily.
Wrinkling Washer not unloaded
promptly. • Always remove items from the washer as soon as the
cycle is complete.
Washer overloaded. • The washer can be fully loaded, but the tub should
not be tightly packed with items. The lid of the washer
should close easily.
Hot and cold water inlet
hoses are reversed.
• Hot water rinse can set wrinkles in garments. Check the
inlet hose connections.
Staining Bleach or softener was
added directly to the wash
load in the tub.Washer was
not unloaded promptly.
• Always remove items from the washer as soon as
possible after the cycle is complete.
Clothes were not properly
sorted. • Always wash dark colors separately from light colors
and whites to prevent discoloration.
• Never wash heavily soiled items washed with lightly
soiled items.
Washer will not
turn ON Power cord is not properly
plugged in. • Make sure that the plug is plugged securely into a
grounded, 2-prong, 220-VAC, 50-Hz outlet.
House fuse is blown,
circuit breaker has tripped,
or power outage has
occurred.
•
Reset circuit breaker or replace fuse. Do not increase
fuse capacity. If the problem is a circuit overload, have it
corrected by a qualified electrician.
NOTE: If the washer stopped during a cycle due to a loss of power, the washer will
resume the cycle where it stopped when the power is restored.
MFL69482502_EN.indd 35 16. 4. 5. 오전 9:16