LG T2735NTWV, Руководство пользователя

Страница: 16 / 85

15
ENGLISH
Using non-skid pads (optional)
If you install the washing machine on a slippery surface,
it may move because of excessive vibration. Incorrect
leveling may cause malfunction through noise and
vibration. If this occurs, lay the non-skid pads under the
leveling feet and adjust the level.
1
Clean the floor to attach the non-skid pads.
• Use a dry rag to remove foreign objects or
moisture. If moisture remains, the non-skid pads
may slip.
2
Adjust the level after placing the washing machine
in the installation area.
3
Place the adhesive side of the non-skid pad on the
floor.
•
It is most effective to install the non-skid pads
under the front legs. If it is hard to place the pads
under the front legs, place them under the back
legs.
This side up
Adhesive side
4 Check again that the washing machine is level.
• Push or rock the top edges of the washing
machine gently to make sure that the washing
machine does not rock. If the washing machine
rocks, level the washing machine again.
Connecting Inlet Hose
• Water supply pressure must be between (1.0 ‒ 8.0
kgf/cm
2 ).
• Do not strip or crossthread when connecting inlet hose
to the valve.
•
If the water supply pressure is more than 0.8 MPa, a
decompression device should be installed.
• Periodically check the condition of the hose and
replace the hose if necessary.
Checking Rubber Seal Inlet Hose
Two rubber seals are supplied with the water inlet hoses.
They are used for preventing water leaks. Make sure the
connection to taps is sufficiently tight.
Hose connector
Rubber
seal
MFL69482502_EN.indd 15 16. 4. 5. 오전 9:16