22
SETTINGS
Function
Product
Description
Option
Aircon Vent.
Wi-Fi pairing
O
This function executes the pairing
function of the Wi-Fi module connected
to the indoor unit.
-
Zone Name
O
The name of each Zone to be used
for zone control can be determined by
directly typing it according to the user's
style.
-
Comfort
Cooling
O
O
Set the steps for comfort cooling
operation of outdoor unit.
Off / Step1 / Step 2 / Step 3
ODU
Refrigerant
Noise
Reduction
O
O
This function sets the refrigerant noise
reduction mode of the outdoor unit.
This function is available only if the outdoor unit M/S setting of the installer
settings is Master.
Smart Load
Control
O
O
This function improves operation
efficiency based on indoor, outdoor
temperature and humidity values.
Set SLC step value.
Defrost Mode
O
O
This function sets the defrost mode
operation of the outdoor unit.
Low Noise
Mode Time
O
O
The product will operate in quiet mode
for the set time.
Set the Start time / End time. Set the Start time / End time. It is only possible
to set when the outdoor unit M/S setting of the installer setting is Master and
the outdoor unit low noise mode priority setting is “Remote controller”.
Advanced
Fan Speed
“Auto”
O
It is a function to create a pleasant
indoor environment, the fan speed
is automatically adjusted according
to the difference in indoor/desired
temperature.
On/Off
Delay Time
O
After a delay for the set-up time, the
ventilation system operates.
5 / 10 / 15 / 20 / 25 min
Midnight Air
Cooling
O
You can save energy by releasing
indoor heat at night in summer and
supplying cool outdoor air to indoor.
Enter the midnight air cooling only when the set time is satisfied with the
outdoor temperature conditions.
My Favorite
Temperature
O
This function remembers the desired
temperature that the user frequently
sets and automatically sets it during the
initial operation.
On/off
CO
2
Fan
Control
O
This function sets the FAN operating
standards based on the CO2
concentration of ventilation products.
Fan Control During
Operation On
Fan Control During Operation Off
Off / Low / Periodic
Off / Periodic
Human
Detection
Mode
O
Energy saving can be achieved
through power saving operation and
wind direction setting through human
sensing.
Vision Saving
Absent Timer Setting
Vision Wind Direction
Power Saving
Saving
Off
5/10/15/30/60
Human Detection Direct
WindHuman Detection
Indirect Wind
Top And
Bottom
Selection
O
This function sets the use of the upper
and lower vanes when operating the
product.
Both Open / Upper Vane Open / Lower Vane Open
Economizer
O
Provides outside air to a room to save
energy and improve the air quality
indoors
Off
Auto
Step 1
Step 2
Disable the
economizer
function to
keep the
outside air
damper
closed.
If the outside air
temperature is
lower than the air
temperature indoors
when cooling is being
operated, outside air is
supplied to the room to
save energy.
Opens the outside
air damper opening
by one stage to
improve the indoor
air quality by
introducing fresh air
into the room.
Opens the
outside air
damper opening
by two stages
to improve the
indoor air quality
by introducing
fresh air into the
room.
Indoor Unit
Display Light
Brightness
O
This function adjusts the brightness of
the indoor unit display light.
On
Off
Auto
-
“Off” setting is only
available in the
indoor units that have
brightness control
function.
“Auto” setting is only available in the
indoor units that is equipped with the
human detection sensor.When set
to Auto, the indoor unit display light
brightness will automatically adjust
according to the illuminance detected
by the human detection sensor.
