LG MultiSITE VM3 Скачать руководство пользователя страница 6

Страница: 6 / 56

LG MultiSITE

VM3

Due to our policy of continuous product innovation, some specifications may change without notification.

SAFETY INSTRUCTIONS

Note:

Disconnect power before installing or servicing the unit.

There is risk of equipment damage or degraded performance.

MultiSITE VM3 unit is for use with select LG air conditioning systems only.

Do not attempt to use this unit with any other

type of system.

There is risk of equipment damage or degraded performance.

Clean up the site after all procedures are finished, and check that no metal scraps, screws, or bits of wiring have been left

inside or surrounding the controller or indoor units.

Do not allow water, dirt, or animals to enter the controller.

There is risk of unit failure or degraded performance.

Do not spill water or other liquid on the inside of the controller.

Do not drop the controller into water. If the unit is

immersed in water or other liquid, contact your local authorized LG distributor for support.

There is risk of unit failure or degraded performance.

Remove all power to controller before attaching (plug in) or detaching (unplug) any option module.

There is risk of possible equipment damage.

Do not remove the controller’s cover.

No configurable or user-serviceable items (such as jumpers or a battery) require cover removal. All items are accessible as switches and connectors

on the unit’s top, bottom, and side, or behind the unit’s front access door or microSD card shutter.

This device is only intended for use as a monitoring and control device.

Do not use it for any other purpose.

There is risk of data loss or equipment damage.

Before removing or inserting the microSD card, disconnect all power to the controller and use static discharge precautions.

There is risk of equipment damage.

The MultiSITE VM3 unit is not compatible with a Power-Over-Ethernet (POE) network.

Do not connect the controller on a

network segment which carries power.

The unit may fail.

Содержание MultiSITE VM3

























































Результаты поиска

Содержание MultiSITE VM3

Отзывы:

LG MultiSITE VM3, Руководство для стартапов, Страница: 6 / 56

Результаты поиска

Содержание MultiSITE VM3

Отзывы: