LG MultiSITE VM3 Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 56

LG MultiSITE VM3 Скачать руководство пользователя страница 54

54

LG MultiSITE

TM

VM3

Due to our policy of continuous product innovation, some specifications may change without notification.

©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.

Updating Network Settings example in the System Shell

Network Configuration Utility
Enter new value, ‘.’ to clear the field or ‘<cr>’ to keep existing value. Hostname <localhost> : J8_East
Domain <> : myDomain.net
Primary DNS Server <> : 8.8.8.8
Secondary DNS Server <> : 8.8.4.4
Route <192.168.1.1> :
Primary IPv6 DNS Server <> :
Secondary IPv6 DNS Server <> :
IPv6 Route <> :

NET1 Ethernet interface (en0)

IP address (clear to use DHCP) <> : 192.168.1.36
Subnet mask <255.255.255.0> :
Enable IPv6 addressing on this adapter? (Y/n) :
IPv6 address (clear to use stateless autoconfiguration) <> :
Enable NET2 (en1) interface? (y/N) : Y NET2 Ethernet interface
IP address (clear to use DHCP) <> : 172.15.16.36
Subnet mask <255.255.255.0> :
Enable IPv6 addressing on this adapter? (Y/n) :
IPv6 address (only 1 adapter may use IPv6 Autoconfiguration) <> :
**** IPv6 Autoconfiguration NOT supported on NET2 interface. IPv6 on   NET2 will be disabled.
Confirm new configuration Hostname  : J8_East
Domain : myDomain.net Default Gateway : 192.168.1.1
Primary DNS  : 8.8.8.8
Secondary DNS

: 8.8.4.4

Default IPv6 Gateway :
Primary IPv6 DNS :
Secondary IPv6 DNS :

NET1 settings:

IP Address

: 192.168.1.36

Subnet Mask : 255.255.255.0
IPv6 Addressing assigned via Autoconfiguration

REFERENCE INFORMATION

«
...
52
53
54
55
56
»

Содержание MultiSITE VM3

























































Отзывы:

Нет отзывов