manualshive.com logo in svg

LG MultiSITE VM3, Руководство для стартапов, Страница: 32 / 56

Поделиться
Скачать
LG MultiSITE VM3 Скачать руководство пользователя страница 32

32

LG MultiSITE

TM 

VM3

Due to our policy of continuous product innovation, some specifications may change without notification.  

©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.

1.  In the User Name field, type in the desired user name for platform login. 
2.  In the Password fields, type in a strong password (it must match in both password fields). Password must use a minimum of 10 characters 

including: at least one uppercase character, at least one lowercase character, and at least one digit.

3.  In the (optional) Comment field, you can enter an alphanumeric descriptor for this platform admin user, where it is seen in the “Users 

table” if there are more than one platform user.

4.  Click the Next button. You proceed either to the final commissioning (review changes) step, or if you selected to configure additional plat-

form daemon users, you see your replacement user in the Users table of the Platform Daemon Authentication dialog, as shown below.

Specifying a platform user to replace the factory-default platform user

You see this dialog only in the initial commissioning of a new MultiSITE VM3 controller, or possibly at some future point after installing an N4 

“clean dist” file.

Figure 22: Platform Daemon Authentication.

Figure 23: Platform Daemon Authentication.

RUNNING THE COMMISSIONING WIZARD

Содержание MultiSITE VM3

























































Отзывы:

Нет отзывов