45
Start-Up Guide
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
Included in this view are commands and related dialogs in which you can do the following:
• Set the date and time in the MultiSITE VM3 controller.
• Change the HTTP port used by the MultiSITE VM3 for the platform daemon (platform server). The default port is 3011.
•
Change TLS settings used by the MultiSITE VM3 for secure “platformssl” access, including configured state, platformssl port (HTTPS Port),
PKI certificate, and TLS protocol. The default port is 5011.
Note that in Niagara 4, “SSL” is always implemented using the TLS (Transport Layer Security) protocol.
• Enable or disable SFTP (Secure File Transfer Protocol) and SSH (Secure Shell) access to the MultiSITE VM3 controller. By default, such
access is disabled, where both protocols use TCP port 22.
Note:
Although SFTP and SSH are more secure than FTP and Telnet access, enabling still poses security risks. It is strongly recommended you
keep this access disabled. Upon completion of any use, such access must be disabled once again.
• View daemon output and change logging levels.
• Enable debug access for temporary browser access to platform daemon diagnostic tools.
• Perform other platform tasks initially performed with the Commissioning Wizard, such as modifying platform admin users (User Accounts),
configuring runtime profiles, and so on.
Figure 33: Platform Administration View.
PLATFORM SERVICES (STATION) AND
ADMINISTRATION