LG MultiSITE VM3 Скачать руководство пользователя страница 27

Страница: 27 / 56

Start-Up Guide

Due to our policy of continuous product innovation, some specifications may change without notification.

3. To resort the list alphabetically, click the Module header in the table. To return to the default sort order, click the table’s (blank) description

header.
4. To reset the selection of modules to the original collection, click the Reset button.
5. Click the Next button to go to the next step.

Installing or upgrading core software

At the install/upgrade core software step, the dependencies of the MultiSITE VM3 platform are compared against the distribution (dist) files

available in your MultiSITE Supervisor PC’s “software database.” For the initial commissioning, the wizard determines what core distribution

files are needed, selects the files automatically, and then informs you in a dialog, as shown in the following figure.
Click Next to continue.

Figure 18: Commissioning Wizard.

RUNNING THE COMMISSIONING WIZARD

Содержание MultiSITE VM3

























































Результаты поиска

Содержание MultiSITE VM3

Отзывы:

LG MultiSITE VM3, Руководство для стартапов, Страница: 27 / 56

Результаты поиска

Содержание MultiSITE VM3

Отзывы: