15 EN
INSTALLATION
5
6
NOTE
Guide the lever carefully through the grille
as you push it in.
●
NOTE
●
See the Electrical Data section for
information on attaching the power cord
to an electrical outlet.
●
Heatproof Foam
H
Heatproof foam improves the cooling
capability of the air conditioner.
4
Before installing the front grille, fold out the
vent control lever located to the left
of the control panel, as shown below.
W1
(Adhesive Backed)
W2
Connect the wire harness before
assembling the front grille.
Attach the front grille to the cabinet by
inserting the tabs on the grille into the
slots on the front top of the cabinet.
Push the grille in until it snaps into place.
Insert 2 type A screws through the front
grille.
8
After the air conditioner is installed,
measure the curtain panel on each side
and cut the adhesive-backed heatproof
foam to fit each panel. The size of the
panels may differ. Remove the backing
from the heatproof foam and attach the
foam to the curtain panels.
W1
W2
7
Remove air filter from the front grille by
pulling the filter forward and then up
slightly.
W
H
W
H
H
