manualshive.com logo in svg

LG LVi510, Руководство пользователя, Страница: 65 / 67

Поделиться
Скачать
LG LVi510 Скачать руководство пользователя страница 65

65

Reference

Symptoms

Resolutions

IP Utility

There is no Search device.

1)  Check the Device Status. 

ex) network connection , booting operation of device and power 

connection of device.

cf) network condition : Client(VMS installed PC) network and device 

network are the same local area. 

2)  Check the Client Status.

ex) check the network connection or check that a firewall is not 

blocking a “Bonjour”.

If firewall refused “Bonjour” or “UDP Packet” , please set to the accept 

“Bonjour” and “UDP Packet”.

3)  Not supported “port forwarding”.

ex) Unique value of device is only IP Address in VMS Device Search. 

So VMS is not supported “Port forwarding”.

4)  There are same IP address in searched results.

It is IP Conflict. If the LG network device is set with a static IP address 

and if the DHCP option is set then there may be ip’s same as the 

network device and other network partner. Hence set the static ip 

address to 0.0.0.0 to resolve this conflict.

Can’t network setting.

1)  For network setting, Client(VMS installed PC) network and device 

network have to the same local area.  

2)  Check that a firewall is not blocking a port number 81. “81 port” 

is used WSDL communication for network setup. Please set to the 

accept “81 Port”.

Can’t IP setting by ARP_PING of device.

1)   For IP setting by ARP_PING, client IP address and device address is 

the same local area .For example, If the client IP address is 10.164.47.

ooo , device IP address must 10.164.47.xxx . That is ARP_PING SPEC.

2)   Check the device setting of Enable ARP Ping in VMS_RemoteSetup. If 

this setting is not checked , ARP Ping is disabled.

The warning 

message is 

displayed when 

you access the 

device.

If the Network encryption option is set to HTTPS, the warning message 

will be displayed. You should install the certification or change the 

Network encryption option to HTTP to solve the problem.
You can install the certificate as shown below.
1.   Log-in the device.
2.   Install the certificate to your computer following the on-screen 

instructions. 

Содержание LVi510




































































Отзывы:

Нет отзывов