background image

4

Air Conditioner

Safety Instructions

• When installing the unit, use the installation kit provided with the product.

- Otherwise the unit may fall and cause severe injury.

• Be sure to use only those  parts which are  listed in the svc  parts list. Never attempt to modify the equipment. 

- The use of inappropriate parts can cause an electrical shock, excessive heat generation or fire.

• Indoor/outdoor wiring connections must  be secured tightly and the cable should be routed properly so that

there is no force pulling the cable from the connection terminals.
- Improper or loose connections can cause heat  generation or fire.

• Safely dispose off the packing materials. Like screws, nails, batteries, broken things etc after installation or svc

and then tear away and throw away the plastic packaging bags.
- Children may play with them and cause injury.

• Be sure to check the refrigerant to be used. Please read the label on the product.

- Incorrect refrigerant used can prevent the normal operation of the unit.

• Do not touch , operate, or repair  the product with wet hands.

- There is risk of electric shock  or fire.

• Do not place a heater or other heating appliances near the power cable.

- There is risk of fire and electric shock.

• Do not allow water to run into electric parts. Install the unit away from water sources.

- There is risk of fire, failure of the product, or electric shock.

• Do not store or use or even allow flammable gas or combustibles near the product. 

- There is risk of fire.

• Do not use the product in a tightly closed space for a long time. Perform ventilation regularly.

- Oxygen deficiency could occur and hence harm your health.

• Do not open the front  grille of the product during operation. 

- There is risk of physical injury, electric shock, or product failure.

• If strange sound, smell or smoke comes from product.Immediately turn the breaker off or disconnect the power

supply cable.
- There is risk of electric shock or fire.

• Ventilate the product room  from time to time when operating it together with a stove, or heating element etc.

- Oxygen deficiency can occur and hence harm your health.

• Turn off the power and the circuit breaker when cleaning or repairing the product.

- There is risk of electric shock.

• When the product is not to be used for a long time, turn off the circuit breaker.

- There is risk of product damage or failure, or unintended operation.

• Take care to ensure that nobody especially kids could step on or fall onto the outdoor unit. 

- This could result in personal injury and product damage. 

• Take care to ensure that power cable could not be pulled out or damaged during operation.

- There is risk of fire or electric shock.

• Do not place anything  on the power cable.

- There is risk of fire or electric shock.

• When flammable gas leaks, turn off the gas and open a window for ventilation before turning on the product.

- Do not use the telephone or turn switches on or off. There is risk of explosion or fire.

Содержание LQN120HV4




























Отзывы: