Owner's Manual
17
Operating Instructions
ENGLISH
The unit will operate in super high fan speed in jet mode. To cancel
the JET Mode press the JET Mode button or the FAN SPEED button
or the room temperature setting button again and the unit will operate
in high fan speed in heating mode.
JET
MODE
Forced operation is used when the remote controller
can't be used. The operation will be started if the
ON/OFF button is pressed. If you want to stop the
operation, re-press the button.
• LED is turned on, off after 1 or 2 s, when you push
the ON/OFF button.
NOTE
ON/OFF
button
Test operation
During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room
temperature and resets in 18 minutes. During test operation, if remote controller signal is received, the unit operates as
remote controller sets. If you want to use this operation,
Press and hold the ON/OFF button for 3~5 seconds
,
then the buzzer sound 1 'beep'. If you want to stop the operation, re-press the button.
Forced operation
Jet Mode Operation
or or
JET
MODE
Cooling
Model
Heat pump Model
Room Temp.
≥ 24℃(75℉)
21℃(70℉) ≤ Room
Temp. < 24℃(75℉)
Room Temp.
< 21℃(70℉)
Operating mode
Cooling
Cooling
Healthy Dehumidification
Heating
Indoor FAN Speed
High
High
High
High
Setting Temperature 22℃(72℉)
22℃(72℉)
23℃(73℉)
24℃(75℉)
