Settings
90
Se
ttings
]
Move up:
Moves the selected network upward.
]
Move down:
Moves the selected network
downward.
Access points
(Menu #.8.4)
This menu shows the access point list. You can create
new profiles, delete or edit them by using the Option
Menu. However, you cannot delete or edit default
configurations depending on country variant.
You can edit the following configuration items by
selecting the right soft key, if allowed.
]
Press
Done
key to save any configuration changes.
Browser settings
(Menu #.8.5)
Profiles
Select the appropriate profile by pressing
.
This will activate the profile to initiate browser
launch.
Security
If user presses Certificates, certification information
is shown.
User can clear secure session information by pressing
Session clear.
Certificates
If stored, a list of root/ca certificates required for
WTLS/TLS can be found here. Certificates can be
viewed from the list.
Session clear
Secure (WTLS/TLS) session data can be cleared
using this option. Session data should be cleared to
establish a new secure session.
Character encoding
Sets the browser default character set to one of the
following.
Access Point profile name.
Choose the bearer from the list.
(Default is
UMTS
.)
Choose the authentication from the list.
(Default is
No auth
)
Information provided by service provider.
Information provided by service provider.
APN name to access network. Information
provided by service provider.
Connection title
Bearer
Authentication
User name
Password
APN