20
Getting Started
Ge
tting St
ar
te
d
Attention:
]
Avoid using the Flash Memory Card when the
battery is low.
]
When writing to the card, wait for the operation to
complete before removing the card.
]
The card is designed to fit easily into the system
one way only.
]
Do not bend the card or force it into the slot.
]
Do not insert any memory cards other than those
made by microSD.
]
If the microSD has been formatted using FAT32,
format the microSD using FAT16 again.
For more information on the microSD, please refer to
the memory card instruction manual.
Memory card formatting
Before you start to use the memory card you have to
format it. After you insert the memory card, select
Menu
>
Settings
>
Phone settings
>
Memory
status
>
Format external memory
, then press
.
This operation should only be done when you insert
the memory card for the first time.
During formatting various folders will be created for
different data types.
Turning the handset on/off
Turning your handset on
Ensure that your USIM card is in your handset and
the battery is charged. Press and hold
until the
power comes on. Enter the USIM PIN code that was
supplied with your USIM card if the
PIN code
request
is set to
On
. (Note: Please refer to page 71)
After a few seconds you will be registered on the
network.
Turning your handset off
Press and hold
until the power goes off.
There may be a few seconds delay while the handset
powers down.
Do not turn the handset on again during this time.
