LG GoldStar MS-106YG Скачать руководство пользователя страница 7

Страница: 7 / 35

FEATURES

CONTROL PANEL

4-1

OPERATING INSTRUCTIONS

Oven Front Plate

Window Door Screen

Door Seal

Control Panel

Safety Door Lock System

Turntable

Rotating Ring

Display Window

1100W

1. DISPLAY.

The display includes a clock and

indicators that tell you time of day, cooking time settings,
and cooking functions selected.

2. ONE TOUCH POPCORN.

Touch this pad

to pop a bag of microwave popcorn without entering a
cook power or time.

3. ONE TOUCH POTATO.

Touch this pad to cook up to 4

potatoes without entering a cook power or time.

4. ONE TOUCH BEVERAGE.

Touch this pad to heat up to

2 cups of beverage without entering a cook power or
time.

5. FRESH VEGETABLE.

Touch this pad to cook fresh

vegetables without entering a cook power or time.

6. ONE TOUCH FOOD PLATE.

Touch this pad to heat a

plate of food without entering a cook power or time.

7. FROZEN ENTREE.

Touch this pad to cook a 10 oz.

frozen entrée without entering a cook power or time.

8. AUTO DEFROST.

Touch this pad to meat, poultry, or

fish by entering a weight.

9. CLOCK.

Touch this pad to enter the time of day.

10. TIMER.

Touch this pad to use your microwave oven as

a kitchen timer.

11. NUMBER PADS.

Touch number pads to enter cooking

time, power level, quantities, or weights.

12. TIME.

Touch this pad to set a cooking time.

13. POWER.

Touch this pad to set a cooking power.

14. STOP/CLEAR.

Touch this pad to stop the oven or clear

entries.

15. EZ ON.

Touch this pad to cook at 100% cook power for

30 seconds to 99 minutes, 59 seconds.

16. START.

Touch this pad to start all entries (except the

ONE TOUCH and EZ ON functions, which start
automatically).

Содержание GoldStar MS-106YG




































Результаты поиска

Содержание GoldStar MS-106YG

Отзывы:

Бренды по названию

Популярные бренды

LG GoldStar MS-106YG, Руководство по обслуживанию

Результаты поиска

Содержание GoldStar MS-106YG

Отзывы:

Бренды по названию

Популярные бренды