LG GM210 Скачать руководство пользователя страница 134

Страница: 134 / 165

- 135 -

LGE Internal Use Only

10. ENGINEERING MODE

LGE Internal Use Only

10.3.7 MicSpk Test

The sound from MIC is recorded for about 3 seconds, then it is replayed on the speaker

automatically.

10.3.8 Camera Test

This menu is to test camera(preview and capture automatically.)

10.3.9 Video Camera Test

This menu is to test video camera(record and play automatically.)

10.4 Trace option [MENU 4]

10.5 Call timer [MENU 5]

10.6 Fact. Reset [MENU 6]

This menu is to set the Digital Audio Interface Mode for Speech Transcoder and Acoustic testing.

1) All calls : This displays total conversation time. User cannot reset this value.

2) Reset settings : This resets total conversation time to this, [00:00:00].

This is NOT a necessary menu to be used by neither engineers nor users.

This Factory Reset menu is to format data block in the flash memory and this procedure set up the default
value in data block.

This displays software version stored in the phone.

Attention

①

Fact. Reset (i.e.Factory Reset) should be only used during the Manufacturing process.

②

Servicemen should NOT progress this menu, otherwise some of valuable data such as

Setting value, RF Calibration data, etc. cannot be restored again.

10.7 S/W version

Содержание GM210
































































































































































Результаты поиска

Содержание GM210

Отзывы:

LG GM210, Руководство по обслуживанию, Страница: 134 / 165

Результаты поиска

Содержание GM210

Отзывы: