LG GM210 Скачать руководство пользователя страница 131

Страница: 131 / 165

- 132 -

LGE Internal Use Only

Only for training and service purposes

10. ENGINEERING MODE

LGE Internal Use Only

10.1 BB Test [MENU 1]

10.1.3 Backlight

This menu is to test the LCD Backlight and Keypad EL Backlight.

1) Backlight on :

LCD Backlight and Keypad EL Backlight light on at the same time.

2) Backlight off :

LCD Backlight and Keypad EL Backlight light off at the same time.

3) Backlight value :

This controls brightness of Backlight. When entering into the menu,

the present backlight-value in the phone is displayed. Use Left/Right key to

adjust the level of brightness. The value of the brightness set at last will be

saved in the NVRAM.

10.1.2 LCD

COLOUR : WHITE, RED, GREEN, BLUE, BLACK

Contrast Value

10.1.1 CAMERA

This menu is to test the Camera.

1) Main LCD preview : It shows the picture on Main LCD.

10.1.4 Buzzer

This menu is to test the melody sound.

1) Melody on :

Melody sound is played through the speaker.

2) Melody off :

Melody sound is off.

10.1.5 Vibrator

This menu is to test the vibration mode.

1) Vibrator on :

Vibration mode is on.

2) Vibrator off :

Vibration mode is off.

Содержание GM210
































































































































































Результаты поиска

Содержание GM210

Отзывы:

LG GM210, Руководство по обслуживанию, Страница: 131 / 165

Результаты поиска

Содержание GM210

Отзывы: