LG GCC-4242N Скачать руководство пользователя страница 19

Страница: 19 / 69

3. About Prevention the DVD-ROM from to be copy

A data is able to encode and record in the disc, if a copyright holder wants to prevent the disc from copying.

In case of a disc enhanced movie of 3 titles......

DISC KEY (2048 Bytes) is used to encode the whole contents in the disc and TITLE

KEY (5 Bytes) is used to encode the title respectively.

So, the data is encoded and stored in a disc through the unknown algorithms

with a disc key and title key. (At this time, the disc key and title key are stored

in a disc.)

…

As above, the disc is able to copy when the disc key and title key are

opened.

Then, ROM-DRIVE encodes the disc key and title key and transfers to MPEG-

2 board.

If you want to play the disc prevented from the copy......

First of all, ROM-DRIVE and MPEG-2 decoder identify with each other through the procedure as

described below.

1. Drive and host gives and takes the ID of 2bit. This ID is AGID (Authentication Grant ID).

The various decoder boards are attached to the host, in these, AGID sets the MPEG-2 decoder and drive.

2. After the AGID is set, MPEG-2 decoder generates the challenge key (10 Byte) and transfers to drive. The

board and drive generate key 1 (5Byte) with the challenge key respectively. (Of course, the Algorithm

generating the key 1 is not known.)

3. Compare with the generated key 1, if it corresponds each other, the first step of authentication is

completed. This is a course to identify the MPEG-2 decoder with a drive.

4. The second step of authentication is a course to identify a drive with the MPEG-2 decoder.

The dirve generates a challenge key and transfers it to the MPEG-2 decoder. The dirve and MPEG-2

decoder generate the key 2 (5Byte) with the challenge key, compare with each other, and if it corresponds

and the secondary step of authentication is completed.

5. As above, the identification is completed.

6. The dirve and MPEG-2 decoder generate the Bus key with the key 1 and key 2 and own it.

7. Dirve encodes the disc key and title key with this Bus key and transfers to the MPEG-2 decoder.

8. The MPEG-2 decoder reads the encoded disc key and title key with the Bus key only.

9. MPEG-2 board lets data read from the drive to decode with the read disc key and title key and makes into

the video signal by decoding.

ROM-DRIVE

AGID

HOST

MPEG-2
DECODER

Challenge key

encoded disc key, title key

Содержание GCC-4242N






































































Результаты поиска

Содержание GCC-4242N

Отзывы:

Похожие инструкции для GCC-4242N

Бренды по названию

Популярные бренды

LG GCC-4242N, Руководство по обслуживанию

Результаты поиска

Содержание GCC-4242N

Отзывы:

Похожие инструкции для GCC-4242N

Бренды по названию

Популярные бренды