ENGLISH
38
SoftAP
•
SoftAP is similar to Access Point. When you enable this function, TV acts as an Access Point.
•
Regardless of the Instant On mode, the SoftAP setting stays unchanged after power off/on. (Depending on model)
Use Default
•
If you want to use default password(this password was generated randomly), you must select ‘Enable’ in this item.
Security Key
•
If you want to change default password, you need to change ‘Use Default’ value into ‘Disable’.
Wi-Fi Signal Strength
•
You can control wireless signal strength on SoftAP. This is controlled by 5 step. If you select ‘Not Used’, wireless signal strength will be set to Max
value.
Wi-Fi Channel
•
You can control wireless channel on SoftAP mode. This is controlled from 1 to 11 channel. If you select ‘Auto’, wireless channel of SoftAP will be
set to random channel.
Mode
•
You can select NAT(Network address translation) mode and BRIDGE mode for Soft AP.
Security Type
•
You can select ‘WPA2-PSK’, ‘WPA2-Enterprise’ and ‘Open’ if you selected ‘BRIDGE’ mode.
Radius Server IP, Radius Server Port, Radius Server Key
•
You should enter Radius Server information if you selected ‘WPA2-Enterprise’.
Beacon
(Depending on model)
•
This option enables BLE Beacon, one of Bluetooth 4.0's features.
•
Beacon Mode (On/Off Toggle): enables the Beacon feature.
•
The iBeacon/Eddystone Type Beacon features are supported.
iBeacon
•
Beacon UUID (hex): Set the UUID.
1
Field1: 4byte hex value (8 digits)
2
Field2: 2byte hex value (4 digits)
3
Field3: 2byte hex value (4 digits)
4
Field4: 2byte hex value (4 digits)
5
Field5: 6byte hex value (12 digits)
•
Major (0–65535): Sets the Major value.
•
Minor (0–65535): Sets the Minor value.
